How to Fix 0x80070426 Error for Windows Update & Microsoft Store

If you are a Windows user, you may come across a 0x80070426 error at some point. If you have already faced that error and looking for a solution, here’s the perfect write-up for you. Now, let’s explain all the practical solutions you can try to fix this error.

In fact, 0x80070426 error is not the rarest error you might experience with Windows 10 system. This specific error can appear when you perform a Windows update or even a Microsoft Store update. Well, the error might say that there was something wrong with installing some of your updates. Also, it says that the system will try to do it later. It asks you to contact support or perform a search if the respective error continues to appear. The respective message will contain the error code 0x80070426. It is a unique code that represents the type of error.

If the error appears when you try to update Microsoft Store, that will state a pretty different message. For instance, it might say that the purchase you tried to make cannot be completed. The error message might come with the same code (0x80070426).

Both of the above instances are pretty common among Windows users. So, knowing how to fix this error would be handy for anyone. Since the error is pretty similar in both cases, the solutions have no significant difference. In the following section of the article, we will explain the most practical solutions to address it. So, go ahead and learn how to get rid of the 0x80070426 error and use your system.


Solutions to fix 0x80070426 error on your computer

There are many solutions to fix the 0x80070426 error on your PC. Just go ahead and learn all those fixes below. Please note that all these solutions are easy to try no matter even if you are a beginner. All you need is to follow the steps given under each solution.

First, let’s take a quick look at the list of solutions you can consider to fix the 0x80070426 error.

  1. Perform a reset on your Microsoft Store
  2. Use the troubleshooter for Windows Update
  3. Try to fix the 0x80070426 error with SFC and DISM
  4. Perform a manual download for the required updates
  5. Reconfigure your antivirus settings or the firewall
  6. Reset the components related to Windows Update
  7. Check the status related to your MS Account Sign-in Service

Now, in the following section, let’s learn about these solutions in a detailed manner. So, let’s go ahead and learn what they are.

PS: let’s figure out how to fix the Error 0x80246007 on Windows 10 and the 0x80240439 Error on Windows Store with ease.

01. Perform a reset on your Microsoft Store to fix 0x80070426 Error

The first and the most basic solution to address the 0x80070426 error is to reset your Microsoft Store. In this case, please use the CMD prompt to succeed. Also, you should run CMD with Administrator privileges to make it happen. If you don’t know how to do that, you can go through the steps mentioned below.

  • First, you should open the “Run” utility by pressing the “Windows” and “R” keys together.
  • After that, you should enter the text “CMD” in the search box to proceed. You can then hit the “Shift” and “Enter” keys together to open the command prompt with administrator privileges.
  • Once the command prompt is opened, please enter the following code in it.
Wsreset [hit Enter]
Reset Microsoft Store to Fix 0x80070426 Error

Now, you are supposed to wait for some time, and you will be able to work normally. You can update Windows with no issue. Also, you can purchase from Microsoft Store.

Besides, if you are experiencing the issues like Error Code 0x80070570, here are the top solutions for you.

02. Use the troubleshooter for Windows Update

This is the next solution on this list to fix the 0x80070426 error on your PC. As per this method, you are supposed to use the troubleshooter on Windows Update and fix it. You will be able to find this option in the “Settings” option, which is located in the Start menu.

After that, you should go to the option called “Update and Security” and choose “Troubleshooter.”

Then, choose the option called “Windows Update,” which is located on the right-hand side. Then, please click on the “Run the troubleshooter.”

Run Troubleshooter to Fix 0x80070426 Error

You will notice a couple of instructions on the screen. You should follow those instructions to get the troubleshooting done.

Also, let’s learn more about how to Activate Windows 10 Free effortlessly.

03. Try to fix the 0x80070426 error with SFC and DISM

If none of the above options have worked, you should try this solution to fix the 0x80070426 error. To do that, you should launch a command prompt with administrator privileges. If you don’t know how to launch a command prompt with administrator privileges, follow the previous method’s steps again.

Please follow up below the simple guide to run an SFC scan on your system.

sfc /scannow [hit enter]
sfc /scannow

This will perform a scan. Once the scan is completed, please restart the PC so the changes will be applied.

To fix the 0x80070426 error with the assistance of a DISM, you can use the command prompt. Once again, you should open the command prompt with administrator privileges. Then, you are supposed to enter the commands mentioned below to accomplish this task. Make sure you hit the “Enter” key after typing each line.

Dism /Online /Cleanup-Image /CheckHealth [hit enter]

Dism /Online /Cleanup-Image /ScanHealth [hit enter]

Dism /Online /Cleanup-Image /RestoreHealth [hit enter]

Those commands should run on the system, and they will be completed in some time. After that, you should perform a restart on the PC. Then, you should try to install the updates once again. For many users, this should fix the 0x80070426 error. However, if you did not succeed, just go to the next solution.

04. Perform a manual download for the required updates

If the 0x80070426 error is related to a cumulative update but not related to a feature, try this one. It is always possible to download updates for your Windows OS manually and try to fix this error. First, you should find the updates that have failed, and you can choose the below-mentioned steps to do that.

  • First, go to “Settings” on your system and choose “Updates & Security” to proceed. After that, you should choose “View Updates History.”
Run Windows Update to Fix 0x80070426 Error
  • Now, you should carefully check if any update has already failed. You can see such failed updates, and they are listed with “Failed” status under the column labeled “Status.”
  • Once you have done that, you should go to the official download center of Microsoft. Then, you should perform a search for the respective update (you can use the KB number) for that.
  • After that, you can download the respective update manually and get it installed.

Once that process is completed, you might be able to see that the 0x80070426 error is gone.

05. Reconfigure your antivirus settings or the firewall to fix 0x80070426 Error

If you have not succeeded even after the previous steps, try this option as well. You already know that your computer is installed with Windows Defender by default at the installation of the OS. As per this method, you should disable it temporarily. Sometimes, your system’s firewall can block certain actions assuming that they are harmful to your system. In that case, disabling it will do the job. If you have installed a third-party application as a firewall, disable that as well. Hopefully, this method should work and fix the 0x80070426 error.

06. Reset the components related to Windows Update

Here’s another fix to overcome the error 0x80070426. To do that, you should open the command prompt with administrator privileges. You already know that, as we explained in a couple of previous steps in this article.

Once the command prompt is opened, enter the following commands one after the other. Make sure that you hit “Enter” after each line.

net stop wuauserv [hit enter]

net stop bits [hit enter]

net stop cryptSvc [hit enter]

net stop msiserver [hit enter]

The above codes can stop the updated services on Windows from running. Then, you should enter the commands below so they will rename the directories.

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old [hit enter]

ren C:\Windows\System32\catroot2 catroot2.old [hit enter]

As the final step, just enter the following lines. These lines will start the stopped services once again. Make sure that you hit the “Enter” key after each line.

net start wuauserv [hit enter]

net start bits [hit enter]

net start cryptSvc [hit enter]

net start msiserver [hit enter]

pause [hit enter]

Now, you can exit the command prompt window. After that, restart the PC. That should fix the 0x80070426 error.

07. Check the status related to your MS Account Sign-in Service

Also, as the final solution, check the status pertaining to the MS account sign-in. If it is disabled, you must start it. You can do it in the Service Manager option.


So, those solutions will fix the 0x80070426 error on your PC for you; please try it yourself.